Seamer 1.6

Home / Seamer 1.6

Versatile and flexible heavy gauge rollformer.

The SEAMER 1.6 rollforming machine has 7 forming stations with 2 forming positions. One inboard forming position forms the Pittsburgh lock; and one auxiliary or outboard forming position has the capability of forming 1 of 8 different profiles depending on which auxiliary roll set is ordered.

Standard with JAG quality construction, this machine has high precision needle-type bearings; an industrial motor; heavy 3/4” (19mm) chassis plate; case-hardened and ground roll shafts; and an arc-welded steel stand protected with top-quality primer and paint finish.

Download Product Sheet

Auxiliary Roll Sets:

TYPE

CAPACITY

APPROXIMATE MATERIALS USED

SIZE

Double Seam Type “S”

22 – 28 gauge (0.48 – 0.86 mm)

1-1/8” (28.5 mm)

3/8” (9.5 mm) Seam

Drive Cleat

20 – 26 gauge (0.55 – 1.00 mm)

2-1/8” (54.0 mm)

1-1/8” (28.5 mm) Width

Straight Right Angle Flange

16 – 24 gauge (0.70 – 1.61 mm)

<7/16” (<11 mm)

Pittsburgh 5/16”

20 – 28 gauge (0.47 – 1.00 mm)

1.0” (25.4 mm)

5/16” (7.9 mm) Pocket

Double Seam Type “L”

16 – 20 gauge (1.00 – 1.61 mm)

1-1/4” (31.8 mm)

7/16” (11.1 mm) Seam

Standing Seam

16 – 20 gauge (1.00 – 1.61 mm)

2-1/8” (54.0 mm)

3/4” (19.1 mm) Height

3 in 1

Right Angle Flange

22 – 26 gauge (0.55 – 0.85 mm)

1/2” (12.7 mm)

Standing Seam

22 – 26 gauge (0.55 – 0.85 mm)

1-1/8” (28.6 mm)

5/8”Seam

T-Connection

22 – 26 gauge (0.55 – 0.85 mm)

1-3/4” (44.5 mm)

5/8”Seam

Hemming Rolls

20 – 24 gauge (0.70 – 1.00 mm)

1/4”, 3/8”, 1/2” (6.4, 9.5, 12.7 mm)

Specifications

Capacity:

16 – 20 gauge (1.0 – 1.6 mm)

Depth of Pocket:

1/2” (12.7 mm) – uses 1-3/8” (34.9 mm) of material

Speed:

45 fpm (13.9 m/min)

Motor:

4 HP (3 kw) – 230 volts, 60 cycle, 3 phase AC, 1800 RPM

Dimensions:

48”L x 24W” x 37”H (1220 x 610 x 940 mm)

Weight:

484 lbs. (220 kg)

PRODUCTS